At present, plug seeders can be basically divided into three categories: needle seeders, drum seeders, and disc (flat plate) seeders. Among them, needle seeders and roller seeders are widely used in China. What are the precautions when using the plug planter? Let's follow the editor of Satlin plug planter to find out.

1. Before the planter works, it should be filled with oil in time to each oil filling point to ensure that the running parts are fully lubricated. The missing or damaged parts should be replenished, replaced and repaired in time. Be careful not to apply oil to gears and chains to

Avoid sticking to mud and increase wear.

2. The working length of each seed wheel is equal, and the displacement is the same. The seeding rate adjustment mechanism is flexible, and there must be no sliding and empty movement.

3. The disc of the disc opener can rotate flexibly without shaking or rubbing against the opener body.

4. Before and after each shift and during work, the soil in all parts should be cleaned up, and special attention should be paid to removing the soil and oil on the transmission system.

5. After each shift, the fertilizer in the fertilizer box should be cleaned up to prevent the fertilizer from corroding the fertilizer box and the parts of the fertilizer. Check whether the seed metering shaft and the fertilizing shaft rotate flexibly.

6. After each shift, the planter should be parked in a dry covered shed. When parked in the open, the seed fertilizer box should be tightly covered. When parking, drop the opener, put down the support to support the machine body stably, so that the planter is on the frame

Reduce unnecessary load.

The above are the precautions when using the plug planter. At the end of the planting season, or when the planter is not used for a long time, store it in a dry place away from dust and soil. Clean the seed tray and protect the air supply pipeline. Hope the above content will help everyone.